Step by Step Guide on How to Install A Residential Fence  

If you’re planning to install a fence soon and want to know more about how it’s done, then you came to the right place. Most of the time, privacy fences for homes are installed about 6ft tall and it’s very ideal that you buy fencing panels in prefabricated 8-foot sections even though slats can also be bought individually. Below, you will learn a step by step guide on how to install a fence using this ratio. 

Steps on How to Install a 6ft Privacy Fence  

1. Mark Posts and Corners 

Begin by laying out the locations for end posts and corners. Mark all these spots with some indicator to enable you in adjusting the locations as needed. Fences are very simple to install on moderately level terrain. However, adjustments could easily be created for minor grades. Set these end posts and corners carefully. This is because their placement will affect the appearance of the fence. Use a post that is around 8 to 10 feet high for a 6-foot fence.  

2. Start Digging a Hole 

Dig at least a 24-inch deep hole. Make sure that diameter is around 3 times larger than the width of the post. It may be required to dig a hole deeper than 25 inches if the location of your fence is subject to high vibration and is unprotected. You might need to pour first a small concrete footer and let it harden before going further in very soft soil. Add the depth of the footer to the depth of your hole. 

3. Secure Your Post 

To secure the post, there are 2 other methods. First is packing the hole with gravel and the second is filling the hole with cement. Using gravel to fill up the hole doesn’t need any curing. Also, it’s much easy to pull out the post whenever it is needed. Gravel will let water to drain. This will avoid wood rot and would also make the fence flexible somehow. This allows the fence to slightly give in the wind. 

4. Set Corner Post 

Between the corner posts, string a line at around 13 inches from the top. At the bottom, you should do the exact same thing. These lines will be utilized in setting your middle posts. In the same manner as the corner posts, dig your holes. You should set the 1st post 8 feet on center, determining from the exterior edge of the corner post.  

5. Installing Panels 

Lastly, it’s time for you to install the panels once all the fence posts have been allowed to cure and set. Begin installing the panels by either screwing them or nailing them to the posts starting at the corner post. To assist in holding them, you can place spacers under the panels. This will keep the proper distance from the ground.  

6. Professional Assistance 

Installing a fence is no easy task. This is why if you think the fence that you’re installing is not stable enough for your property, then we suggest that you ask assistance from a reliable fence company that offers high-quality fence services like installing wood fence, vinyl fence, aluminum fence, and many more. 

Exterior Home Maintenance Tips 

Inside undertakings like changing climate control system channels, painting walls, cleaning appliances, and cupboards are all easy to do because we spend most of our time inside the house. However, it’s significant that you remember to deal with your home’s outside upkeep also. Staying aware of outside maintenance is just as important as maintaining the inside as well. It will help your home’s wellbeing last longer. Here are some tips to help you maintain and care for your home’s exterior. 

1. Pruning Trees and Shrubs 

Ensure that trees and shrubs aren’t hurting your home’s outside valuables. You’ll have to ensure tree branches aren’t hanging over your rooftop and harming shingles. You ought to likewise ensure that any thick bushes or other development aren’t on your siding. You should keep something like 1-2 feet of room between them and your home. 

2. Repairing Concrete Cracks 

Over time, cement can wear out and break. It will need occasional fixing and filling in. If you see cracks in the concrete, fix them and fill as soon as possible while they are still little because otherwise, they will be harder to fix. Leave them cracked and unfixed, and you’ll be taking a gander at a greater fix work, possibly one that needs expert assistance. Which means additional cost. If the cracks happen on walkways or sidewalks, fix them immediately and you’ll prevent possible accidents and injuries from happening. What’s more, split cement is essentially not good to look at, so it’s a smart thought to get it fixed so your home looks better. 

3. Painting  

Maintaining the exterior surfaces by painting them will seal surfaces. This shields your home from dampness harm. You don’t have to paint the entire exterior wall. Only touch up parts that need them. Nonetheless, remember that the shading may not coordinate precisely. Watch out for zones that lose paint or peel because this can be an indication of an increasingly genuine moisture issue. 

4. Inspecting the Roof  

Your rooftop secures the home. However, you will need to check it periodically to guarantee it continues to protect your home. With an outside and inside examination of your rooftop, you can discover indications of deformities and flaws. These issues may give dampness, a chance to rot, even unwanted pests get inside your home and ought to be settled right away. An assessment will search for harmed or broken shingles, missing shingles, rust spots or split caulk on glimmering, indications of rot, drooping, blazing harm, and the sky is the limit from here and you’ll literally see the sky if you don’t do immediate repair. Most of the time, roof repairs are only needed and not replacing it entirely. However, if your roof has served you and your family all of its services, then you might consider getting a new roof. 

5. Cleaning the entry door 

You, your family, and guests enter through the front door. Dirty doors will not go unnoticed. Use a mild cleaner to clean the front door. Abstain from utilizing rough brushes or other things that may scratch it and power wash it either. 

Tree Removal Expert Tips and Tricks 

Tree felling is a type of a tree removal process where the tree has to be cut near the base of the trunk. It’s a physically challenging job and a dangerous process if not correctly executed. There’s definitely more to cutting trees than what it seems. Concepts like tree inspection, positioning, and techniques all come into play.  

If not done properly, deaths and injuries may occur during the tree removal process. To prevent these things from happening, a lot of experts have to be involved, which may even include materials scientists, structural engineers, and master arborists.  

Tree Removal Facts  

Tree cutting is a fairly common task requested by homeowners who want to get rid of a problematic tree. However, it’s not the first course of action for certified arborists. Arborists are never in favor of cutting down healthy trees. Tree felling should always be done by a group of people that includes a sawyer or chainsaw operator who is well-trained and physically fit.  

There shouldn’t be any mistake during a tree felling process because that may result in property damage, serious injury, or even death. Safe tree removal operations should be practiced at all times. For starters, the tree should be properly inspected. That’s how the tree expert could come up with the strategic and precise plan that will safely take down the tree in the direction or position desired.  

How to Inspect Trees for Cutting  

There are different ways to cut trees and the right technique to be used will depend on the orientation of the tree. Straight trees used a different technique from leaning trees and those with an irregular architecture. Extra safety precautions have to be observed for trees with structural defects.  

The same goes true for trees with spiraling barks, dead branches, and rotten wood pockets. The base of the tree has to be carefully examined to know if it has any hollow or rotten parts. Rotten wood affects the direction of the fall, which is why tree felling may not be a good option at all.  

Tree Removal Safety  

Once it has been determined that the tree can be felled down successfully, the drop zone should be marked. This zone should be free from obstacles, targets, or people. It has to be taped out so there won’t be unexpected surprises. The taped area should be twice as big as the actual height of the tree.  

There must be a clear path for the sawyer as well, so he can immediately remove himself from the path of the falling tree. Keep in mind that the tree may fall faster than expected and without warning. It’s important that his escape path is free of obstacles or physical barriers.  

Always Hire the Experts  

To prevent foreseeable damages, harms, injuries, or even deaths, always hire tree removal experts. Be sure to ask the question, “Which company offers the best tree service near me?” That way, you’ll be able to come up with a good decision as to which experts will help you take down your tree.  

Again, don’t trust the difficult job of taking down trees to anyone. It has to be done by people with proper knowledge and tools. Remember that any mistake is going to be a costly one for you and for the other people involved.